Prezzo consigliato:   47, 00  IVA INCLUSA
Acquista tramite un nostro rivenditore autorizzato





Scopri chi sono gli epoint ->

Altoparlante da 6" con chassis in acciaio stampato, magnete in ferrite, bobina da 1.5", potenza 100Watt, impedenza 8ohm

Cod. prodotto: 15300021
Brand:
Il prodotto non è presente nei nostri magazzini, ma potrebbe essere disponibile presso il tuo negozio di fiducia. Chiedi al nostro rivenditore a te più vicino.

Celestion - TF0615 100W 8ohm - LF Pressed Steel Chassis Loudspeaker - Ferrite
Altoparlante da 6" con chassis in acciaio stampato, magnete in ferrite, bobina da 1.5", potenza 100Watt, impedenza 8ohm

Caratteristiche
- 6" mid-range driver providing 95dB sensitivity and 100Wrms (AES standard) power handling
- 1.5" high temperature copper voice coil wound on polyimide former for increased reliability
- Rigid chassis design for maximum energy transfer
- Vented magnet assembly for enhanced cooling
- Achieves optimal performance in compact enclosures
- Ideal for 2-way systems

Specifiche Generali
Nominal diameter: 152mm/6in
Power rating(1): 100Wrms
Continuous power rating(2): 200W
EIA power rating(3): 150W
Nominal impedance: 8ohm
Sensitivity(4): 95dB
Frequency range: 85-6000Hz
Voice coil diameter: 38mm/1.5in
Chassis type: Pressed steel
Magnet type: Ferrite
Magnet weight: 0.8kg/17oz
Coil material: Round copper
Former material: Polyimide
Cone material: Kevlar loaded paper
Surround material: Cloth sealed
Suspension: Single
Xmax(5): 2.5mm/0.1in
Gap depth: 6mm/0.24in
Voice coil winding width: 6.5mm/0.26in

Parametri di Thiele-Small
D: 0.14m/5.51in
Fs: 107.2Hz
Mms: 11.397g/0.402oz
Qms: 5.83
Qes: 0.682
Mmd: 10.316g/0.364oz
Qts: 0.611
Re: 7.25ohm
Vas: 6.49lt/0.23ft3
BI: 9.03Tm
Cms: 0.193mm/N
Rms: 1.317kg/s
Le (at 1kHz): 0.5mH

Informazioni di Montaggio
Overall diameter: 178mm/7.01in
Overall depth: 74mm/2.91in
Cut-out diameter: 147mm/5.79in
Mounting slot dimensions: Ø 4.3mm/0.17in
Number of mounting slots: 4
Mounting PCD range: 168.5mm/6.63in
Unit weight: 1.4kg/3.1lb

Note
(1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Continuous Power Handling is defined as 3dB greater than the AES rating.
(3)Tested as per the EIA-426-A standard.
(4)Measured on axis at 1W, 1m in 2pi anechoic environment.
(5)Xmax derived from: (voice coil winding width-gap depth)/2.
(6)Small signal parameters measured after unit subjected to pre-conditioning signal.

Per stampare la scheda prodotto, clicca qui
Per una panoramica su tutta la serie Celestion TF Ferrite, clicca qui
Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui